Question Locked

Fujitsu 4640FI Scanners

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have this scanner and it suddenly produces a black line on the scanned copies thru the adf feeder only. If you scan by lifting the lid there is no line. We have taken it apart and cleaned it but the line still appears. This scanner is used to scan approx 800 pages per day in the billing department. We are looking for any suggestions on how to fix the black line problem.

3 replies

by churdoo

I'm assuming it's a vertical line and it's placed in same relative location across the page.

Have you purchased the Fujitsu consummable kit for the scanner, and have cleaned with the supplied cloths, swabs, and cleaning solution?

There's likely something on the glass over the scanning sensor; pop open the ADF and look real carefully at the glass in the relative area where the line appears on the passing page. There must be something on the glass, or the glass may be scratched (by a staple or something).

I'm not sure if the ADF scanning assembly is user-serviceable, I suspect not, so if you can't remove or can't find the mark, you may have to call Fujitsu repair and have them send a repair tech. They're not cheap, but at 800 scanned pages per day, it'll be a small price to pay.

by kathy.wroten

Thanks for that- I think we are going to have to call for a repair- we have cleaned it as best we can with the proper supplies. That is what is so strange it just started out of the blue with the line, and it did not start until after we cleaned it. We were hoping we just left something in there but that was not the case. Oh well I guess today I will look for a repair place for Fujitsu Scanners!

This discussion is closed to new replies.