Question Locked

HP LASERJET 1010

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
In our ofice one win98 machine with HP laserjet 1010 printer is shared in network . When we print from other machines now we get message like printing failed due to unknown system error.Earlier printing was possible and suddenly one day it was happened like this.Any body know the solution ?

3 replies

by rajmittal123

In our ofice one win98 machine with HP laserjet 1010 printer is shared in network . When we print from other machines now we get message like printing failed due to unknown system error.Earlier printing was possible and suddenly one day it was happened like this.Any body know the solution ?

by stephanie

Our office has experienced a similar problem. You could try the following on the off chance it may work. I am looking into up grading the ram but not sure if this is possible (if anyone can confirm a memory upgrade on this type of printer - your help is greatlt appreciated.

The HP Laserjet 1010 black & white printer has a very small print spool memory probably less than 12meg.

Consequently when more than one person is trying to print simultaneously, information blockages occur and the system spits the dummy.
Now there are a few things you can do to try and prevent this.

Make sure you shut down your computer at the end of the day.
This clears any print blockages held on your computer and can fix other hidden issues.

But also try
1. open the print dialog box
2. delete the offending document ? it is usually showing an error message
if it does not clear from the dialog box:
3. go and turn the printer off and on again
4. Then try printing again.

If your document still fails to print repeat the above but also shut down and restart your computer ? then start up and log on and try printing again.

Tedious I know. Choice of solutions are:
1. Upgrading the current
2. Consider purchasing a black & white network printer with a minimum of 64meg.
3. Go back to running the black & white printer through a dedicated computer rather than a printer switch box.

Hope this helps.

This discussion is closed to new replies.