Question Locked

Not printing

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a hp1300 printer. when i send print it will not print. it has three lights all lights are turning on. printer doesn't make any action.In the tray the paper is also enough.There is enough toner too. can it be the problem of eraser lamp(first stage cleaning problem) or any other problem could be it.

4 replies

by dma69593

Have you installed the driver for the printer? Make sure you have added it to the pc; go into settings and into printers and faxes, then click on add printer. From there you select the type of printer you have. Generally, when connecting your printer to pc, the pc will probaly detect it.
Also, make sure you set your printer as the default printer.

by dangolrajesh

Yes, the driver is installed and it is set as default printer too.

by 1bn0

1300 Manual

http://h20000.www2.hp.com/bc/docs/support/SupportManual/bpl13095/bpl13095.pdf

Status light patterns page 72-73

All lights are on.(not Blinking)Fatal error
● Turn the printer off and then back on.
● Unplug the printer for 5 minutes, and then plug it back
in.
● If the printer still has an error, Contact HP support.

If you clear the lights, then test the printer.

Page 8.

Go button and light: To print a demo page or to continue printing while in manual feed mode,press and release the Go button. To print a configuration page, press and hold the Go button for 5 seconds.

Ifyou get that , THEN plug itin to your P.C. and try to print. Until then anything you do on your P.C. is a waste of time.

This discussion is closed to new replies.